China Factory Free sample Warehouse Conveyor Rollers - Servo Conveyor Roller – HEGY-50 – Harmonic factory and manufacturers

Factory Free sample Warehouse Conveyor Rollers - Servo Conveyor Roller – HEGY-50 – Harmonic

Short Description:

Product Detail

Product Tags

Feedback (2)

With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of Mini Mill Hollow Rotary Table , 150mm Hollow Rotary Table , Impact Roller Conveyor , Through our hard work, we have always been on the forefront of clean technology product innovation. We are a green partner you can rely on. Contact us today for more information!

Factory Free sample Warehouse Conveyor Rollers - Servo Conveyor Roller – HEGY-50 – Harmonic Detail:

Features:

1. Compact design

Integrating the motor into the tube enables a compact conveyor system design.

2. High efficiency and energy saving

Brushless drive has braking energy recovery function. Conveyor systems do not require pneumatic or conventional drives, and such drives must operate continuously.

3. The application is extremely flexible

There are many models of HEGT rollers, which can be used in various types of different conveyor systems. For users, this means only a single interface, not multiple interfaces. Depending on the application area, PolyVee belts, round belts or timing belts can be used for force transmission. Nine gear ratios, you can choose the perfect speed and torque pairing. Electronic brake (zero position-movement-hold) can keep the conveyed goods in position even on the gravity conveyor.

4. Low noise

The use of decoupling elements enables low-noise operation.

5. Maintenance free and easy installation

The drive with internal commutation electronics does not require any maintenance. Equipped with overload protection device to prevent damage caused by overheating or blockage. It is reliably connected via a motor cable with a 5-pin snap-in plug, without complicated screw connections.

Application：

Used to drive unit handling conveyor systems, such as transporting cartons, bins, press plates or tires at normal ambient temperatures. It is suitable for linear conveyors and small belt conveyors, especially zero-pressure accumulation conveyors. It can also be used in shuttle systems to align conveyor sections or transfer machines with other “conveyor system branches”.

Technical Specifications

Rated Voltage	24 V	24 V	24 V	48 V	48 V	48 V
Power	20 W	35 W	50 W	20 W	35 W	50 W
Rated Current	1.4 A	2.4 A	3.4 A	0.7 A	1.2 A	1.7 A
Starting Current	3.0 A	5.5 A	7.5 A	1.5 A	2.8 A	3.8 A
Maximum Noise Emission (Installed)	55 dB(A)，Application related
Motor Cable Length	500 mm
Maximum Reference Length	1500 mm
Working Temperature	0 To 40 °C
Motor Shaft	Stainless Steel，11 mm HEX，Thread M12 x 1
Anti-Static Model	Y (<106 Ω)
Pipe Thickness	Diameter 50 mm：1.5 mm Diameter 51 mm：2 mm
Pipe Material	Galvanized Steel, Stainless Steel
Pipe Casing	PVC Rubber sleeve 2 mm、5 mm PU Rubber sleeve 2 mm Package glue2 To 5 mm

Maximum load capacity

The maximum load capacity of EGT50 depends on the length of drive head and roller.

Roller length	≤1000 mm	1100 mm	1200 mm	1300 mm	1400 mm	1500 mm
Maximum load capacity of each roller without drive	1100 N	925 N	750 N	650 N	550 N	475 N
Maximum load capacity of each drum with drive (PolyVee, round belt or timing belt)	350 N

Design type

20 W

Gear ratio	Max. Conveying Speed [m/s]	Min. Conveying Speed [m/s]	Rated Torque [Nm]	Acceleration Torque [Nm]	Continuous Stall Torque [Nm]
9:1	2.01	0.09	0.25	0.63	0.63
13:1	1.39	0.06	0.36	0.91	0.91
18:1	1.00	0.04	0.50	1.26	1.26
21:1	0.86	0.04	0.59	1.47	1.47
30:1	0.60	0.03	0.85	2.13	2.13
42:1	0.43	0.02	1.18	2.95	2.95
49:1	0.37	0.02	1.37	3.44	3.44
78:1	0.23	0.01	2.02	5.43	5.43
108:1	0.17	0.01	2.82	7.57	7.57

35 W

Gear ratio	Max. Conveying Speed [m/s]	Min. Conveying Speed [m/s]	Rated Torque [Nm]	Acceleration Torque [Nm]	Continuous Stall Torque [Nm]
9:1	2.01	0.09	0.44	1.11	1.11
13:1	1.39	0.06	0.64	1.60	1.60
18:1	1.00	0.04	0.89	2.22	2.22
21:1	0.86	0.04	1.04	2.59	2.59
30:1	0.60	0.03	1.49	3.74	3.74
42:1	0.43	0.02	2.07	5.18	5.18
49:1	0.37	0.02	2.42	6.04	6.04
78:1	0.23	0.01	3.55	9.54	9.54
108:1	0.17	0.01	4.95	13.00	13.00

50 W

Gear ratio	Max. Conveying Speed [m/s]	Min. Conveying Speed [m/s]	Rated Torque [Nm]	Acceleration Torque [Nm]	Continuous Stall Torque [Nm]
9:1	2.01	0.09	0.63	1.58	1.58
13:1	1.39	0.06	0.91	2.29	2.29
18:1	1.00	0.04	1.27	3.17	3.17
21:1	0.86	0.04	1.48	3.70	3.70
30:1	0.60	0.03	2.13	5.34	5.34
42:1	0.43	0.02	2.96	7.40	7.40
49:1	0.37	0.02	3.45	8.63	8.63
78:1	0.23	0.01	5.07	13.00	13.00
108:1	0.17	0.01	7.07	13.00	13.00

Before trial installation, these values may have a maximum deviation of ± 20%. After the commissioning phase, 95% of all rollers used are within ± 10%.

Specifications

The minimum reference length depends on the gearbox model, the groove in the tube, and the drive or bearing assembly. Sufficient axial clearance has been reserved, so only the actual track width between the side profiles is required.

When using a tapered hexagonal spring shaft, it must be ensured that the axial clearance is not too high. If the selected roller is too short, the shaft may create play in the hexagonal hole. It is recommended to use hexagonal holes with a minimum size of 11.2 mm. If the roller is installed at an angle, the fastening holes must be enlarged accordingly.

RL = Reference length / order length

EL = Installation length, inner diameter between side profiles

Internal Thread Without Groove